Product

EZPlatform

Teletronics’ EZPlatform AP/Hotspot/Repeater is designed for high-power access point, hotspot and repeater applications.A powerful end-to-end system for a wireless Internet network can be built by integrating the EZPlatform with Teletronics TT subscriber units and other radios.The simplicity of use of the EZPlatform allows operators to quickly bring service to their customers, and with its two serial ports and two Ethernet ports the unit can easily incorporate GPS, GPRS, RFID, VoIP, surveillance cameras, field meters, motion sensors and data networks for multiple industrial and commercial applications. The EZPlatform is available in single or dual radio configuration, with 1 W (2.4 GHz) and 600 mW (2.4/5.8 GHz) radio card options.

EZPlatform
  • Ethernet IEEE 802.3 10BASE-T/100BASE-TX with autonegotiation
  • Networking Bridging mode, NAT gateway, static routing, RIPv2 dynamic routing.
  • DHCP client, DHCP server. Static/dynamic VLAN, IEEE 802.1Q, management
  • VLAN, SSID-based tagging. PPPoE, DDNS, Spanning Tree Protocol,QoS (802.11e and WMM), IPv6
  • Wireless 802.11a/b/g (2.4/5.8 GHz, 700/900 MHz), turbo mode. Four SSIDs per interface, AP/client mode, ad hoc, WDS, roaming. WEP, WPA, WPA2 encryption with hex/ASCII keys. Adjustable RF TX power and data rate.
  • Hotspot: WiFiDog/RADIUS authentication, local/remote captive portal Management HTTP/HTTPS web configuration interface, TELNET. SNMPv2, remote syslog, local event log. Bandwidth control and self-test with default and host-specific upload/download rates. Configuration backup and restore, web-based firmware upgrade.
  • Serial port rescue console, EZManager support
  • Security IP address, MAC address and SSID filtering
  • Firewall, intra-BSS traffic blocking, wireless-wired matching. 802.1X

EZPlatform